% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  4419  100  4419    0     0  13743      0 --:--:-- --:--:-- --:--:-- 13766
Error: Get https://10.87.23.69:8443/api/v1/namespaces/kube-system/pods?labelSelector=app%3Dhelm%2Cname%3Dtiller: dial tcp 10.87.23.69:8443: connect: connection refused
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
Error response from daemon: Cannot kill container: 1aa303ca1652: Container 1aa303ca1652fb368132b1c1df6ce597a26812b07d63c8de0df050de853eea7f is not running
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
*
X Error starting cluster: init failed. cmd: "/bin/bash -c \"sudo env PATH=/var/lib/minikube/binaries/v1.15.0:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml  --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap\"": command failed: /bin/bash -c "sudo env PATH=/var/lib/minikube/binaries/v1.15.0:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml  --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap"
stdout: [init] Using Kubernetes version: v1.15.0
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/var/lib/minikube/certs"
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [minikube localhost] and IPs [10.87.23.69 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [minikube localhost] and IPs [10.87.23.69 127.0.0.1 ::1]
[certs] Using existing ca certificate authority
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Using existing apiserver certificate and key on disk
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[kubelet-check] Initial timeout of 40s passed.

Unfortunately, an error has occurred:
        timed out waiting for the condition

This error is likely caused by:
        - The kubelet is not running
        - The kubelet is unhealthy due to a misconfiguration of the node in some way (required cgroups disabled)

If you are on a systemd-powered system, you can try to troubleshoot the error with the following commands:
        - 'systemctl status kubelet'
        - 'journalctl -xeu kubelet'

Additionally, a control plane component may have crashed or exited when started by the container runtime.
To troubleshoot, list all containers using your preferred container runtimes CLI, e.g. docker.
Here is one example how you may list all Kubernetes containers running in docker:
        - 'docker ps -a | grep kube | grep -v pause'
        Once you have found the failing container, you can inspect its logs with:
        - 'docker logs CONTAINERID'

stderr:         [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
        [WARNING FileExisting-ebtables]: ebtables not found in system path
        [WARNING Hostname]: hostname "minikube" could not be reached
        [WARNING Hostname]: hostname "minikube": lookup minikube on 149.156.4.11:53: no such host
error execution phase wait-control-plane: couldn't initialize a Kubernetes cluster
: exit status 1
*
* Sorry that minikube crashed. If this was unexpected, we would love to hear from you:
  - https://github.com/kubernetes/minikube/issues/new/choose
cp: cannot stat 'onedata/test-reports/*.xml': No such file or directory
cp: cannot stat 'onedata/one_env/sources_info.yaml': No such file or directory
mv: cannot stat 'onedata/tests/gui/logs/report.*': No such file or directory
mv: cannot stat 'onedata/tests/gui/logs/gui_report/images.yaml': No such file or directory
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  4419  100  4419    0     0  12102      0 --:--:-- --:--:-- --:--:-- 12106
Error: Get https://10.87.23.69:8443/api/v1/namespaces/kube-system/pods?labelSelector=app%3Dhelm%2Cname%3Dtiller: dial tcp 10.87.23.69:8443: connect: connection refused
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
The connection to the server 10.87.23.69:8443 was refused - did you specify the right host or port?
Error response from daemon: Cannot kill container: b6d30e7e0c19: Container b6d30e7e0c193ec1e0948e29bb9a7ef819bc7cac6208fa22cf2cecf3c43bbb4a is not running