% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  4822  100  4822    0     0  45065      0 --:--:-- --:--:-- --:--:-- 45490
Error: Kubernetes cluster unreachable: Get "http://localhost:8080/version?timeout=32s": dial tcp 127.0.0.1:8080: connect: connection refused
The connection to the server localhost:8080 was refused - did you specify the right host or port?
The connection to the server localhost:8080 was refused - did you specify the right host or port?
The connection to the server localhost:8080 was refused - did you specify the right host or port?
The connection to the server localhost:8080 was refused - did you specify the right host or port?
The connection to the server localhost:8080 was refused - did you specify the right host or port?
Error response from daemon: Cannot kill container: 8f0a253fc262: Container 8f0a253fc26229b909f0c1673ef20d0a5f06e1969ac02af7b80478f95f01a48d is not running
        [WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase certs/apiserver-kubelet-client: [certs] certificate apiserver-kubelet-client not signed by CA certificate ca: x509: certificate signed by unknown authority (possibly because of "crypto/rsa: verification error" while trying to verify candidate authority certificate "minikubeCA")
To see the stack trace of this error execute with --v=5 or higher

X Error starting cluster: wait: /bin/bash -c "sudo env PATH=/var/lib/minikube/binaries/v1.21.3:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml  --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,Mem": exit status 1
stdout:
[init] Using Kubernetes version: v1.21.3
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/var/lib/minikube/certs"
[certs] Using existing ca certificate authority
[certs] Using existing apiserver certificate and key on disk

stderr:
        [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
        [WARNING FileExisting-socat]: socat not found in system path
        [WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase certs/apiserver-kubelet-client: [certs] certificate apiserver-kubelet-client not signed by CA certificate ca: x509: certificate signed by unknown authority (possibly because of "crypto/rsa: verification error" while trying to verify candidate authority certificate "minikubeCA")
To see the stack trace of this error execute with --v=5 or higher

W1130 06:31:00.303447 1757443 out.go:230] *
*
W1130 06:31:00.304431 1757443 out.go:230] ╭──────────────────────────────────────────────────────────────────╮
│                                                                  │
│    * If the above advice does not help, please let us know:      │
│      https://github.com/kubernetes/minikube/issues/new/choose    │
│                                                                  │
│    * Please attach the following file to the GitHub issue:       │
│    * - /root/.minikube/logs/lastStart.txt                        │
│                                                                  │
╰──────────────────────────────────────────────────────────────────╯
╭──────────────────────────────────────────────────────────────────╮
│                                                                  │
│    * If the above advice does not help, please let us know:      │
│      https://github.com/kubernetes/minikube/issues/new/choose    │
│                                                                  │
│    * Please attach the following file to the GitHub issue:       │
│    * - /root/.minikube/logs/lastStart.txt                        │
│                                                                  │
╰──────────────────────────────────────────────────────────────────╯
I1130 06:31:00.312323 1757443 out.go:165]
W1130 06:31:00.312522 1757443 out.go:230] X Exiting due to GUEST_START: wait: /bin/bash -c "sudo env PATH=/var/lib/minikube/binaries/v1.21.3:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml  --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,Mem": exit status 1
stdout:
[init] Using Kubernetes version: v1.21.3
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/var/lib/minikube/certs"
[certs] Using existing ca certificate authority
[certs] Using existing apiserver certificate and key on disk

stderr:
        [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
        [WARNING FileExisting-socat]: socat not found in system path
        [WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase certs/apiserver-kubelet-client: [certs] certificate apiserver-kubelet-client not signed by CA certificate ca: x509: certificate signed by unknown authority (possibly because of "crypto/rsa: verification error" while trying to verify candidate authority certificate "minikubeCA")
To see the stack trace of this error execute with --v=5 or higher

X Exiting due to GUEST_START: wait: /bin/bash -c "sudo env PATH=/var/lib/minikube/binaries/v1.21.3:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml  --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,Mem": exit status 1
stdout:
[init] Using Kubernetes version: v1.21.3
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/var/lib/minikube/certs"
[certs] Using existing ca certificate authority
[certs] Using existing apiserver certificate and key on disk

stderr:
        [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
        [WARNING FileExisting-socat]: socat not found in system path
        [WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase certs/apiserver-kubelet-client: [certs] certificate apiserver-kubelet-client not signed by CA certificate ca: x509: certificate signed by unknown authority (possibly because of "crypto/rsa: verification error" while trying to verify candidate authority certificate "minikubeCA")
To see the stack trace of this error execute with --v=5 or higher

W1130 06:31:00.312552 1757443 out.go:230] *
*
W1130 06:31:00.313480 1757443 out.go:230] ╭──────────────────────────────────────────────────────────────────╮
│                                                                  │
│    * If the above advice does not help, please let us know:      │
│      https://github.com/kubernetes/minikube/issues/new/choose    │
│                                                                  │
│    * Please attach the following file to the GitHub issue:       │
│    * - /root/.minikube/logs/lastStart.txt                        │
│                                                                  │
╰──────────────────────────────────────────────────────────────────╯
╭──────────────────────────────────────────────────────────────────╮
│                                                                  │
│    * If the above advice does not help, please let us know:      │
│      https://github.com/kubernetes/minikube/issues/new/choose    │
│                                                                  │
│    * Please attach the following file to the GitHub issue:       │
│    * - /root/.minikube/logs/lastStart.txt                        │
│                                                                  │
╰──────────────────────────────────────────────────────────────────╯
I1130 06:31:00.317405 1757443 out.go:165]
cp: cannot stat 'onedata/test-reports/*.xml': No such file or directory
cp: cannot stat 'onedata/one_env/sources_info.yaml': No such file or directory
mv: cannot stat 'onedata/tests/mixed/logs/report.*': No such file or directory
mv: cannot stat 'onedata/tests/mixed/logs/gui_report/images.yaml': No such file or directory